Towel Shelf w Drying Rod 18 Bright
ASI
ASI-7310-18BSurface Mounted Towel Shelf with Drying Rod and Support Brackets shall be fabricated of stainless steel alloy 18-8, type 304. Shelf posts shall be 1/2" x 1" (13mm x 25mm) rectangular tubing with formed mounting flange and bracket welded on end.Cross tubes shall be 3/8" diameter (10mm) and shall be held in receiver holes in support posts. A solid stainless steel 1/4" diameter (6.4mm) drying rod shall be attached at midpoint of support posts and support brackets.
Downloads ASI-7310-18B Specification Sheet
Towel Shelf w Drying Rod 18 Bright
|
SKU
|
Description
|
Quantity
|
|
|---|---|---|---|
|
|
More Info
Stainless Steel Cleaning and Maintenance
Under normal usage, stainless steel products require regular cleaning with a soft clean rag moistened with a mild detergent followed by a water moistened clean rag and then a dry rag, much the same as stainless steel sinks, pot & pans and eating utensils, and can be wiped with lemon oil applied by soft polishing cloth to maintain sheen.
The 9343 #4 satin finished stainless steel should be protected against Muriatic acid and caustic or abrasive materials, and harsh cleaning detergents [with pH outside the range 6 ± .5]. In the event such agents cause discoloration, polish with a stainless steel cleaner such as 3M Stainless Steel Cleaner & Polish and a 3M Scotch Brite pad. Either a blue (less aggressive) or green (more aggressive) pad is recommended.