Toilet Paper Holder - Square - Chase
ASI
ASI-110-1Recessed Toilet Paper Holder, with square bezel, for chase mounting shall hold one (1) standard toilet paper roll and shall be fabricated of alloy 18-8 stainless steel, type 304, 14 gauge. Beveled trim shall have No 4 satin finish. Interior shall have glass blasted satin matte finish. Back mounting plate shall be fabricated of 11 gauge die-formed galvanized steel.
Hardware mounting kit (supplied) shall include two (2) 3" (76mm) long 1/4-20 threaded rods with four (4) washers and nuts and two (2) 1/4- - 20 x 3/4" (19mm) bolts (supplied) to hold back mounting plate in place.
Downloads ASI-110-1 Specification Sheet
Toilet Paper Holder - Square - Chase
|
SKU
|
Description
|
Quantity
|
|
|---|---|---|---|
|
|
More Info
Stainless Steel Cleaning and Maintenance
Under normal usage, stainless steel products require regular cleaning with a soft clean rag moistened with a mild detergent followed by a water moistened clean rag and then a dry rag, much the same as stainless steel sinks, pot & pans and eating utensils, and can be wiped with lemon oil applied by soft polishing cloth to maintain sheen.
The 9343 #4 satin finished stainless steel should be protected against Muriatic acid and caustic or abrasive materials, and harsh cleaning detergents [with pH outside the range 6 ± .5]. In the event such agents cause discoloration, polish with a stainless steel cleaner such as 3M Stainless Steel Cleaner & Polish and a 3M Scotch Brite pad. Either a blue (less aggressive) or green (more aggressive) pad is recommended.