Recessed Toilet Paper Holder - Chase Mount
ASI
ASI-110Recessed Toilet Paper Holder with round bezel for chase mounting shall hold one (1) standard toilet paper roll and shall be fabricated of alloy 18-8 stainless steel, type 304, 14 gauge.
Beveled trim shall have No 4 satin finish. Interior shall have glass blasted satin matte finish. Back mounting plate shall be fabricated of 11 gauge die-formed galvanized steel. Hardware mounting kit (supplied) shall include two (2) 3"(76mm) long 1/4"-20 threaded rods with four (4) washers and nuts each and two (2) 1/4"-20 x 3/4" (19mm) bolts to hold back mounting plate in place.
Orientation of threaded rods shall accommodate shallow or deep wall installation. Back of paper holder shall be provided with two (2) welded-on internal 1/4"-20 threaded anchor T-nuts.
Downloads ASI-110 Specification Sheet
Recessed Toilet Paper Holder - Chase Mount
|
SKU
|
Description
|
Quantity
|
|
|---|---|---|---|
|
|
More Info
Stainless Steel Cleaning and Maintenance
Under normal usage, stainless steel products require regular cleaning with a soft clean rag moistened with a mild detergent followed by a water moistened clean rag and then a dry rag, much the same as stainless steel sinks, pot & pans and eating utensils, and can be wiped with lemon oil applied by soft polishing cloth to maintain sheen.
The 9343 #4 satin finished stainless steel should be protected against Muriatic acid and caustic or abrasive materials, and harsh cleaning detergents [with pH outside the range 6 ± .5]. In the event such agents cause discoloration, polish with a stainless steel cleaner such as 3M Stainless Steel Cleaner & Polish and a 3M Scotch Brite pad. Either a blue (less aggressive) or green (more aggressive) pad is recommended.